 |
As high-flow, high-frequency use spaces, station waiting halls and related areas face unique and harsh cleaning challenges, especially the waiting hall which bears the largest passenger flow: the main waiting area is paved with wear-resistant epoxy floors, which must withstand long-term luggage rolling, chair movement friction, and are vulnerable to scratches from hard objects (such as luggage wheels, metal accessories), while anti-slip tiles at entrances, exits, and tea rooms are easily blocked by sand, soil, and dust brought by passengers. Dense passenger flow leaves a variety of stubborn stains: rain/mud shoe prints in rainy seasons, luggage wheel marks, spilled beverages (milk tea, coffee, mineral water), luggage debris (packaging paper, snack crumbs), and even instant noodle soup and mild oil stains in catering areas. Moreover, stations have strict cleaning constraints: daily deep cleaning can only be carried out during the limited window after operation (usually 4-5 hours), requiring efficient, thorough cleaning without delaying the next day’s operation. Traditional cleaning pads often have poor adhesion to square oscillating scrubbers (leading to sliding and uneven cleaning), fail to penetrate floor pores to remove embedded sand and stubborn stains, or are too harsh and scratch epoxy floors. To solve these core problems, the Fleece Fabric Composite Combo Melamine Rectangular Floor Pad is specially customized for high-speed rail stations, railway stations, and their waiting halls, integrating firm adhesion, efficient stain removal, gentle floor protection, and large-area cleaning capabilities—helping station operation and cleaning teams achieve thorough, safe, and efficient cleaning.
Specially tailored for station cleaning (focus on waiting halls), the pad adopts a rectangular design that perfectly matches square oscillating floor scrubbers—commonly used in station cleaning for its ability to reach narrow gaps and corners in waiting halls (such as beside waiting chairs, under ticket inspection gates, and around catering counters). The pad’s surface layer is made of soft, dense-fiber fleece, which fits tightly to the hook-and-loop surface of station-specific square oscillating scrubbers, with adhesion far superior to traditional cleaning pads. Even during high-speed oscillation, large-area waiting hall cleaning, or cleaning along narrow edges, the pad remains stable without deviation, displacement, or falling off—avoiding uneven cleaning caused by pad sliding, ensuring uninterrupted cleaning efficiency, and helping cleaning teams make full use of the limited post-operation cleaning window to complete large-area cleaning tasks.
Adopting an innovative three-layer composite process (surface fleece fabric + middle PU layer + bottom combo melamine sponge), the pad integrates the advantages of each material to meet the high-intensity cleaning needs of stations. The surface fleece ensures firm adhesion to the scrubber, the middle PU layer enhances toughness and water resistance (adapting to the humid cleaning environment of stations, such as tea rooms and catering areas), and the bottom combo melamine sponge delivers powerful cleaning performance. The advanced composite technology ensures strong bonding between layers—no delamination, cracking, or breakage even after long-term high-frequency use or soaking in water, which is crucial for stations that require daily continuous cleaning. This durability reduces the frequency of pad replacement, saving material and labor costs for station operation teams, and aligns with the station’s demand for long-term floor maintenance and cost control.
Aiming at the diverse and stubborn stains in station waiting halls and related areas, the combo melamine sponge (cleaning layer) features a unique open-cell structure that can penetrate deep into the micro-pores of epoxy floors and anti-slip tiles. It strongly absorbs and removes all common station stains: rain/mud shoe prints, luggage wheel marks, spilled beverage marks, luggage debris, instant noodle soup residues, and mild oil stains. For anti-slip tiles at entrances and exits, it can effectively clear sand and soil blocked in anti-slip textures, restoring the floor’s anti-slip performance and ensuring passenger safety. Its cleaning area is 1.5-2 times that of regular compressed melamine pads, meaning fewer pad replacements during large-area waiting hall cleaning—greatly saving time and labor input, which is critical for station cleaning teams facing tight time windows.
The combo melamine sponge has a fine, gentle texture with micro-abrasive particles that effectively clean without damaging floor surfaces—perfectly compatible with all mainstream station floor materials: wear-resistant epoxy floors (main waiting areas), anti-slip tiles (entrances/exits, tea rooms), and high-gloss epoxy floors and marble (VIP waiting rooms). It does not scratch the wear-resistant layer of epoxy floors (avoiding damage from luggage friction, extending floor service life and reducing maintenance costs), does not block the anti-slip textures of tiles (ensuring passenger safety in high-traffic areas), and does not damage the gloss of marble in VIP waiting rooms (maintaining the high-end image of the station). Additionally, it can slightly repair minor scratches caused by luggage friction and hard objects, further extending the service life of station floors, which is consistent with the station’s requirement of floor material service life ≥10 years.
The pad adopts physical cleaning—only clean water is needed to activate its cleaning function, no chemical cleaners required. This avoids floor corrosion caused by chemical residues, which is especially important for stations with dense passenger flow (protecting passengers’ respiratory health, especially children and the elderly). It also produces no irritating odors, making it suitable for enclosed waiting hall spaces and complying with station environmental protection and public health standards. For particularly stubborn stains (such as dried instant noodle soup), it can also be used with mild cleaners to enhance cleaning effect, ensuring versatility across different station scenarios.
Supplementary advantage: The pad is not only suitable for the core waiting hall (main waiting area, VIP waiting room) but also widely applicable to other key station areas: entrances/exits, ticket inspection gates, tea rooms/catering areas, and luggage storage areas. It realizes one pad for multiple station scenarios, eliminating the need for cleaning teams to prepare different pads for different areas—simplifying operation and improving work efficiency. Its rectangular shape also adapts to the narrow spaces of stations, easily cleaning edges and corners that are difficult to reach with round scrubbers (such as under waiting chairs and beside ticket machines), ensuring no cleaning dead corners in the station.
Sizes: 14×20inch, 14×24inch, 14×28inch, 14×32inch—multiple rectangular specifications to meet the cleaning needs of different station areas (large-area main waiting halls, narrow ticket inspection channels, small tea rooms) and different sizes of station-specific square oscillating scrubbers. Compatible with square oscillating floor scrubbers with hook-and-loop surfaces, the most commonly used cleaning equipment for stations, and its gentle cleaning performance is consistent with the station’s floor flatness and wear resistance requirements (floor flatness deviation ≤2mm/2m, epoxy floor wear resistance ≥AC5).
Specially designed for station-specific square oscillating floor scrubbers with hook-and-loop surfaces. The fleece surface firmly adheres to the scrubber’s hook-and-loop surface, ensuring stable operation without deviation or falling off during high-speed oscillation and edge cleaning.
Suitable for all mainstream station floor materials: wear-resistant epoxy floors, anti-slip tiles, high-gloss epoxy floors, and marble. Gentle cleaning ensures no damage to floor surfaces, protective layers, or anti-slip textures, maintaining floor safety, gloss, and service life, and complying with railway station building design specifications.
Main Waiting Halls: Wear-resistant epoxy floors (prone to luggage wheel marks, shoe prints, and beverage spills, need gentle protection)
Entrances/Exits & Ticket Inspection Gates: Anti-slip tiles (prone to sand blockage, mud shoe prints, need anti-slip texture protection)
Tea Rooms/Catering Areas: Anti-slip tiles (prone to beverage spills, instant noodle soup, and mild oil stains)
VIP Waiting Rooms: High-gloss epoxy floors and marble (need high-gloss protection and gentle cleaning)
Luggage Storage Areas: Wear-resistant epoxy floors (prone to luggage friction scratches and dust accumulation)
