 |
Airports as a high-end, high-flow public space, airport lounges and related areas face unique and harsh cleaning challenges, especially the lounge which bears high passenger demand for comfort and aesthetics: most lounge floors are paved with high-value materials such as marble and VCT, which are delicate and prone to damage—liquid stains like coffee, champagne, and mineral water easily penetrate the floor pores, leaving stubborn marks, while luggage dragging and passenger foot traffic tend to cause fine scratches, damaging the floor’s gloss. Additionally, airport lounges, check-in counter areas, and boarding gate corridors have dense passenger flow, leaving a variety of stains: dense shoe prints, luggage wheel marks, spilled beverages, food crumbs, and mild oil stains from airport restaurant peripheries. Moreover, airports have strict cleaning constraints: daily deep cleaning can only be carried out during the limited window after the last flight and before the first flight (usually 3-5 hours), requiring efficient, thorough, and quiet cleaning without affecting airport operations. Traditional cleaning pads often leave marks on high-end floors, wear down the gloss, have poor adhesion to square oscillating scrubbers (leading to sliding and uneven cleaning), or fail to penetrate floor pores to remove embedded stains. To solve these core problems, the Fleece-Composited Combo Melamine Square Pad is specially customized for airport ground cleaning, focusing on lounge areas, integrating firm adhesion, efficient stain removal, gentle high-end floor protection, and gap-free cleaning capabilities—helping airport operation and cleaning teams achieve thorough, safe, and efficient cleaning, while maintaining the high-end texture of airport spaces and complying with airport public health and environmental protection standards.
Specially tailored for airport cleaning (focus on lounges), the pad adopts a square design that perfectly matches airport-specific square oscillating floor scrubbers—superior to round scrubbers, it can easily reach corner areas of lounges (such as beside lounge seats, under coffee tables, around check-in counters, and beside boarding gate podiums), achieving gap-free cleaning. The pad’s surface layer is made of soft, dense-fiber fleece, which fits tightly to the hook-and-loop surface of airport-specific square oscillating floor scrubbers (compatible with common airport scrubber models with brush rotation speeds of 160-210 RPM, matching the cleaning efficiency of airport-specific equipment like AS-1050 automatic scrubbers), with adhesion far superior to traditional cleaning pads. Even during high-speed oscillation, large-area lounge cleaning, or cleaning along narrow edges, the pad remains stable without shifting, displacement, or falling off—avoiding uneven cleaning caused by pad sliding, ensuring uninterrupted cleaning efficiency, and helping cleaning teams make full use of the limited post-flight cleaning window to complete large-area cleaning tasks efficiently.
Adopting an innovative three-layer composite process (surface fleece fabric + middle PU layer + bottom combo melamine sponge), the pad integrates the advantages of each material to meet the high-intensity, high-standard cleaning needs of airports. The surface fleece ensures firm adhesion to the scrubber, the middle PU layer enhances toughness and water resistance (adapting to the humid cleaning environment of airport lounges and restaurant peripheries), and the bottom combo melamine sponge delivers powerful cleaning performance. With Life Nano’s advanced composite technology, the pad has high bonding strength—no delamination, cracking, or breakage even after being soaked in water for 24-48 hours, which is crucial for airports that require daily continuous cleaning and strict quality control. This durability reduces the frequency of pad replacement, saving material and labor costs for airport operation teams, and aligns with the airport’s demand for long-term floor maintenance and cost control (annual maintenance cost control in 3%-5% of high-end floor decoration costs).
Aiming at the unique high-end scenario stains of airport lounges, the combo melamine sponge (cleaning layer) features a unique open-cell structure that can penetrate deep into the micro-pores of marble, VCT, and other high-end floor materials. It strongly absorbs and removes all common airport stains: coffee, champagne, and mineral water spills (easily penetrating floor pores), dense shoe prints, luggage wheel marks, food crumbs, and mild oil stains from restaurant peripheries. Unlike ordinary cleaning pads that leave marks or fail to clean thoroughly, this pad can completely wipe off stubborn marks, and its fine granular structure can repair fine scratches caused by luggage dragging—restoring the floor’s gloss and keeping it as bright as new. Its cleaning area is 1.5-2 times that of regular compressed melamine pads, meaning fewer pad replacements during large-area lounge cleaning—greatly saving time and labor input, which is critical for airport cleaning teams facing tight time windows.
The combo melamine material is equipped with fine micro-abrasive particles, which are gentle and non-abrasive—perfectly compatible with all airport-specific high-end floor materials: marble, VCT flooring, anti-slip ceramic tiles, epoxy floors, and seamless stone floors. It does not scratch the surface of marble and VCT floors (avoiding damage to high-value floor materials, reducing maintenance and replacement costs), does not wear down the floor’s gloss (maintaining the high-end aesthetic of airport lounges), and does not block the anti-slip textures of ceramic tiles (ensuring passenger safety in high-traffic areas such as boarding gate corridors and baggage claim halls).
The pad adopts physical cleaning—only clean water is needed to activate its cleaning function, no chemical cleaners required. This avoids floor corrosion caused by chemical residues, which is especially important for airport lounges with high passenger flow (protecting passengers’ respiratory health, including international passengers and children) and high-end floor materials (preventing chemical damage to marble and VCT). It also produces no irritating odors, making it suitable for enclosed lounge spaces and complying with airport public health and environmental protection standards. For particularly stubborn stains (such as dried coffee and champagne stains), it can also be used with mild, non-irritating cleaners to enhance cleaning effect, ensuring versatility across different airport scenarios.
Supplementary advantage: The pad is not only suitable for the core airport lounges (domestic/international lounges, VIP lounges) but also widely applicable to other key airport areas: areas around check-in counters, boarding gate corridors, baggage claim halls, transfer corridors, and the periphery of airport restaurants. It realizes one pad for multiple airport scenarios, eliminating the need for cleaning teams to prepare different pads for different areas—simplifying operation and improving work efficiency. Its square shape also adapts to the narrow spaces of airports, easily cleaning edges and corners that are difficult to reach with round scrubbers (such as under lounge seats and beside check-in counters), ensuring no cleaning dead corners in the airport. Moreover, its compatibility with airport-specific square oscillating scrubbers, ensures seamless integration with existing airport cleaning equipment.
Sizes: 14×20inch, 14×24inch, 14×28inch, 14×32inch—multiple square specifications to meet the cleaning needs of different airport areas (large-area lounges, narrow boarding gate corridors, small VIP lounges) and different sizes of airport-specific square oscillating floor scrubbers, and its gentle cleaning performance is consistent with the airport’s high-end floor flatness and gloss requirements。
Specially designed for airport-specific square oscillating floor scrubbers with hook-and-loop surfaces, suitable for scrubbers used in airports. The fleece surface firmly adheres to the scrubber’s hook-and-loop surface, ensuring stable operation without shifting or falling off during high-speed oscillation and edge cleaning, and matching the high cleaning efficiency of airport-specific equipment。
Suitable for all airport-specific high-end floor materials: marble, VCT flooring, anti-slip ceramic tiles, epoxy floors, and seamless stone floors. Gentle cleaning ensures no damage to floor surfaces, protective layers, or anti-slip textures, maintaining floor safety, gloss, and service life, and complying with airport high-end space decoration and maintenance standards.
Airport Lounges: Domestic/international lounges, VIP lounges (marble, VCT floors, prone to coffee/champagne spills, luggage scratches, need high-gloss protection)
Check-In Counter Areas: Anti-slip ceramic tiles, epoxy floors (prone to shoe prints, luggage wheel marks, need efficient cleaning)
Boarding Gate Corridors & Transfer Corridors: Epoxy floors, seamless stone floors (high passenger flow, prone to dust and spills)
Baggage Claim Halls: Anti-slip ceramic tiles, epoxy floors (prone to luggage wheel marks and dust accumulation)
Airport Restaurant Peripheries: Anti-slip ceramic tiles (prone to mild oil stains and beverage spills)
